Industry

Agriculture & Agricultural Machinery manufacturing

Source stamped, welded, cast and machined components for agricultural machinery from manufacturers in Türkiye — one of Europe’s agricultural machinery production bases.

Typical volumes
Batches to series
Key processes
Welding, stamping, casting
Seasonality
Plan ahead of peak season
Marking
CE for complete machines

Overview

Agricultural machinery combines heavy welded structures with wear parts, gears and hydraulic components that must work reliably in dust, mud and seasonal peaks. Typical parts include chassis and frames, soil-working tools, gearbox parts, hydraulic cylinder components and sheet-metal covers.

Türkiye is a major producer of tractors and agricultural machinery, with a supplier base around Konya, Izmir, Bursa and Adana covering welding, stamping, casting, forging and machining.

On Metraxio you describe the part, attach drawings and state material, finish and quantity. The platform structures the requirement and shows which facilities are a technical fit.

Agricultural machinery is seasonal, so production parts must be ready before the season starts and spare parts must stay available for years. Stating annual volumes, coating requirements and delivery timing helps identify facilities that can support both series supply and after-sales parts.

Typical parts & components

  • Welded chassis, frames and drawbars
  • Soil-working tools, blades and tines
  • Gearbox housings, gears and shafts
  • Hydraulic cylinder rods, tubes and heads
  • Stamped and pressed sheet-metal parts
  • Cast brackets, hubs and housings
  • Powder-coated covers and panels

The processes, materials and requirements below are an editorial reference of what is typical for agriculture & agricultural machinery programs — not a statement about facilities in the Metraxio network.

Common manufacturing processes

Typical materials & grades

Certifications & compliance

What buyers in this industry commonly ask suppliers for. Exact requirements depend on the program, customer and part.

Supplier certifications

  • ISO 9001 Typically required

    Baseline quality system.

  • ISO 3834 Common

    Welding quality system.

  • ISO 14001 Sometimes requested

    Requested by some OEMs.

Standards & regulations

  • CE Marking Common

    CE marking for complete machinery.

  • EN 10204 Type 3.1 Common

    Material certificate for loaded parts.

  • ISO 2768 Common

    General tolerances on drawings.

Quality & documentation

  • Dimensional reports and first article samples.
  • Material certificates to EN 10204 3.1 for loaded parts.
  • Welding to qualified procedures.
  • Coating thickness and salt-spray performance on painted parts.
  • CE marking documentation for complete machines.

Typical tolerances & surfaces

  • Welded frames: tolerances per ISO 13920.
  • Machined gear and bearing seats: typically ±0.01–0.03 mm.
  • Hardened wear parts: hardness ranges defined per part.
  • Stamped parts: typically ±0.1–0.3 mm.

Sourcing from Türkiye

Türkiye combines a deep contract-manufacturing base with short routes into Europe. Industrial goods move between Türkiye and the EU under the customs union, so buyers typically avoid EU import duties on qualifying parts.

  • Many European destinations can be reached by road within several days; actual transit depends on origin, destination, customs handling and cargo.
  • Common delivery terms are EXW, FCA and DAP; Metraxio keeps the agreed Incoterm attached to the quotation and order.
  • Agricultural demand is seasonal; agree forecasts and delivery windows early to secure capacity before peak season.

How Metraxio qualifies suppliers

Every request is checked against each facility's structured profile before any supplier is invited.

  • Hard criteria: the required process (e.g. welding, stamping or casting), the specified material and grade, and required certifications.
  • Missing data is not a rejection. If a facility profile does not yet state something, the result is "Needs More Information" rather than "Not Qualified".
  • No match yet? You can continue with Managed Sourcing and the Metraxio team runs supplier discovery for you.
  • Facility identities stay anonymous during the technical assessment.

Example project

How a typical request moves through Metraxio

2,000 hardened soil-working tines — delivered DAP before the season.

  • The buyer uploads drawings for tines with a specified hardness range.
  • Metraxio structures the requirement: forming, heat treatment, spring steel, hardness requirement and DAP delivery.
  • The fit assessment shows which facilities are qualified, which need more information and which do not match.
  • The buyer invites qualified facilities to a Supplier RFQ, or hands the job to Managed Sourcing.
Start a similar project

Frequently asked questions

Can suppliers produce hardened wear parts?

Yes. Forming and heat treatment of blades, tines and discs are common; specify material and hardness.

Which finishes are common?

Powder coating and wet painting in brand colours, and zinc plating for small parts.

Are hydraulic cylinder parts possible?

Many machining shops produce chromed rods, honed tubes and machined heads; list the parts with your requirement.

Can I source complete welded frames?

Yes. Welding, machining and painting of frames are common for agricultural machinery suppliers.

Are supplier names visible during the assessment?

No. Facilities are shown anonymously during the technical assessment. Identities are shared as the engagement progresses.

Related industries

Start a Manufacturing Project

Describe your agriculture & agricultural machinery part, attach drawings and see which facilities are a technical fit before you request quotes.